Bear Bott All In Two CoversBear Bott All In Two CoversBear Bott All In Two CoversBear Bott All In Two Covers
Bear Bott All In Two Covers

Bear Bott All In Two Covers

  (1 Review)
£11.99   

Bear Bott All In Two (AI2) system needs two parts the a cover PLUS an insert that poppers in. This product page is just the cover and inserts are bought separately.

The Bear Bott AI2 cover is lined with faux suede cloth. The suede cloth lining can pick up wetness from a very wet insert so unlike other all in two systems you can't always just replace the inner pad and reuse the cover.  This is especially true with the bamboo inserts, the staydry inserts due to the nature of the fabric tend to keep the suede cloth drier.  If your suede cloth is still clean and dry you can just pop in a new insert and reuse the cover, however if it's not then the wrap will need to be washed as well as the insert.  The wrap will dry quicker than the inserts so as a rule you can have 2 bear botts inserts per cover and this helps to bring the overall cost of your system down. We sell spare bear botts inserts to purchase separately.

Bear Botts AI2 also has the advantage over their all in ones that if your outer wrap becomes damaged or wears out you can easily replace this layer and continue to use the inner parts.  The AI2 Bear Bott nappy system is more economical than their All In One option as you can wash/dry the outer quicker than the inserts so you can have fewer covers than nappies so each nappy works out cheaper.

Bear Bott All In Two is a birth to potty nappy designed to fit from 9-38lbs. As with any onesize nappy system there will be some compromise on fit as the same nappy needs to fit a little baby and a big toddler. The compromise tends to be mainly at the lower end of the weight range, once baby reaches 10/12lbs most of this compromise on fit has passed as baby has filled out.

The AI2 covers are highly adjustable with poppers at the waist including the option to cross the tabs over for a very small baby.  There are also three levels of poppers on the front body of the nappy so you can adjust the length as baby grows. Poppers are the most popular fastening for an "All In" system because as babies get older they often learn to undo Velcro but with poppers they don't usually have the strength or dexterity to open a poppered nappy.


 

specifications

Brand:  Bear Bott
Material:  PUL
Made In:  China

Bear Bott

Bear Bott Care Guide


Flush solids, rinse the nappy and store in a dry pail until it’s time to wash them. There is no need to soak nappies.

Wash your nappies every two or three days.

Pre-rinse nappies on a cold rinse cycle without washing powder. For your main wash cycle, use the recommended amount of washing powder for your load size. Use a long (at least two hour) wash cycle.

Bear Bott nappies can be washed at 40 or 60 degrees, however please be aware that continuous washing at 60 degrees may reduce the lifespan of your nappies.

Do not use fabric softener as this will reduce absorbency. Do not iron. Do not dry clean.

Line dry outside or rack dry inside, do not place on direct heat. Can be tumble dried on low if required. Please be aware that excessive tumble drying for long periods of time and on a high heat setting may reduce the lifespan of your nappies.

Full Bear Bott Washing Instructions can be found on the manufacturer's website here.

Bear Bott Warranty

Bear Bott offer a 12 month warranty from date of purchase, to the original purchaser only.

The warranty covers:

  • Poppers
  • Stitching
  • PUL
  • Zips

Their warranty does not cover (not limited to):

  • Normal wear and tear e.g. pilling, staining, faing, balding, holes in natural fibres, relaxed elastics
  • Leaks
  • Excessive wear and tear
  • Print placement
  • Washing above 60 degrees
  • Soaking, using bleach or fabric softeners
  • Accidental damage
  • Snags
  • Any type of modification

Bear Bott's decision on any warranty claim is final. Details of their warranty are found here.

Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Beautiful and efficient
Saturday, 6 February 2021  | 

Bearbotts have become my absolutely favourite. So slim and gorgeous, without sacrificing containment. 5 stars from this mum!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

free delivery over £40 See our delivery page for full info
nappy advice questionnaire See what The Nappy Lady recommends
friendly customer support 01252 372266 - weekdays 9.30am - 2pm
Related Products
The Very Best Brand Names
Motherease Tots Bots Bambinex
Little Lamb Bubblebubs Smart Bottoms
Bambino Mio Close Parent
Grovia Bear Botts Thirsties Charlie Banana
The Nappy Lady Logo
   
0