Fabric: Stay DryFabric: Bamboo 
Bear Bott All In Two Inserts

Bear Bott All In Two Inserts

  (2 Reviews)
£10.00   

Bear Bott inserts come in two different fabric. A quick drying stay dry insert or a thirsty but slower drying bamboo insert. Bear Bott Inserts are designed for use only in the Bear Bott outer wrap. As a rule you will have 2 inserts to 1 outer wrap.  We sell the inners and outer wraps separately so you can buy your nappy system in the exact quantities you'd like. 

The Bear Bott cover is lined with suede cloth and if this remains clean/soil free you can immediately snap your spare insert into the cover to reuse it a second time.  If the suede cloth has become soiled the cover will need washing before it can be reused, the covers dry very quickly and dry quicker than the inserts so a ratio of 2 inserts to 1 cover tends to work well.

  • Stay Dry Insert - Stay dry fabric outer layers to wick away moisture from your baby keeping their skin and locking it away. The staydry layer makes this the most popular insert.  The insert is made from an absorbent core layers of microfiber and bamboo,  
         
    Composition of Stay Dry Insert - 30% Polyester  / 55% Microfiber / 15% Bamboo.         


     
  • Bamboo - naturally derived and very absorbent.

    Made from woven bamboo, as there is no staydry layer you'll need to use a separate liner.

    Bamboo is more absorbent than cotton, absorbing 60% more moisture. Natural fibers do take longer to dry so you will need to allow a longer drying time with the bamboo insert.  Bamboo will go harder over time just like bathroom towels do in hard water areas. To resoften the bamboo fabric you can briefly tumbledry on low.  It is very important that they are tumble dried on low as bamboo can be damaged if dried on high heat, for the same reason keep away from drying directly on a radiator.
    Composition of Bamboo Insert - 85% Bamboo / 15% Polyester.  

specifications

Brand:  Bear Bott
Drying Speed:  Fast (Bamboo slow)
Containment:  Good
Absorbency:  Good
Looks:  Fairly Slim
Change Speed:  Quick
Ease of Use:  Simple
Length:  Generously Average
Waterproof:  No
Requires a Wrap?  Yes- Bear Botts
Made In:  China
Day or Night:  Day only

Bear Bott

Bear Bott Care Guide


Flush solids, rinse the nappy and store in a dry pail until it’s time to wash them. There is no need to soak nappies.

Wash your nappies every two or three days.

Pre-rinse nappies on a cold rinse cycle without washing powder. For your main wash cycle, use the recommended amount of washing powder for your load size. Use a long (at least two hour) wash cycle.

Bear Bott nappies can be washed at 40 or 60 degrees, however please be aware that continuous washing at 60 degrees may reduce the lifespan of your nappies.

Do not use fabric softener as this will reduce absorbency. Do not iron. Do not dry clean.

Line dry outside or rack dry inside, do not place on direct heat. Can be tumble dried on low if required. Please be aware that excessive tumble drying for long periods of time and on a high heat setting may reduce the lifespan of your nappies.

Full Bear Bott Washing Instructions can be found on the manufacturer's website here.

Bear Bott Warranty

Bear Bott offer a 12 month warranty from date of purchase, to the original purchaser only.

The warranty covers:

  • Poppers
  • Stitching
  • PUL
  • Zips

Their warranty does not cover (not limited to):

  • Normal wear and tear e.g. pilling, staining, faing, balding, holes in natural fibres, relaxed elastics
  • Leaks
  • Excessive wear and tear
  • Print placement
  • Washing above 60 degrees
  • Soaking, using bleach or fabric softeners
  • Accidental damage
  • Snags
  • Any type of modification

Bear Bott's decision on any warranty claim is final. Details of their warranty are found here.

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
Beautiful prints but not very absorbent
Thursday, 4 March 2021  | 

Bear bott nappies are pretty but not very absorbent. Iím just not reaching for them any more as donít trust them not to leak. Shame as I love the designs.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Super absorption
Saturday, 6 February 2021  | 

These are so absorbent! I love bear botts.

The only reason I've dropped a star is they take mega long to dry. And they are so absorbent that they drink up water from the other clothes/inserts hanging which allows down the drying process even longer.

But saying that, it means they are fab in the nappy. Wish I could give 4.5 stars.

I would live to see a fleece lining on top so I didn't have to bother with a liner (like with the stay dry version).

Was this helpful to you?  Yes  /  No

This review has not been appraised.

free delivery over £40 See our delivery page for full info
nappy advice questionnaire See what The Nappy Lady recommends
friendly customer support 01252 372266 - weekdays 9.30am - 2pm
Related Products
The Very Best Brand Names
Motherease Tots Bots Bambinex
Little Lamb Bubblebubs Smart Bottoms
Bambino Mio Close Parent
Grovia Bear Botts Thirsties Charlie Banana
The Nappy Lady Logo
   
0